Silent-Lign Pillow Blocks
The Bushings Inc. “Silent-Lign” Pillow Block combines the best features of a constantly lubricated sleeve bearing, and an oil-resistant Neoprene flexing medium, within a sturdy Zinc Trivalent plated, stamped and welded steel mounting bracket.
“Silent-Lign” Pillow Blocks Offer:
- Accommodate Maximum Amount of Misalignment
- Stop Vibration
- Eliminate Transmission of Noise
- Low Profile – where Clearance is a Consideration
- Constantly Self-Lubricating – Porous Bronze Sleeve
- Oil Resistant Neoprene Flexing Medium
- Comes Complete with Rustproof Stamped Steel Bracket with Slotted Mounting Holes
- Self Aligning – Utilizes the Entire Inside Diameter of the Bearing (No Shaft Gall at the Edges)
QUIETS NEW AND USED EQUIPMENT
The “Silent-Lign” solves your complex engineering problems, both in new product design and replacement on noisy, new and used equipment. Field proven, these Pillow Blocks accommodate maximum shaft misalignment, plus quiets noisy equipment by eliminating vibration.
Featuring the “Silent-Lign” sleeve bearing cartridge, these Pillow Block assemblies offer low initial cost, and minimal maintenance expense, while providing durable, reliable service. “Silent-Lign” bearings are oil impregnated. The porous bronze sleeve acts as a metallic sponge. It constantly obtains sufficient lubrication through absorption with the application of a few drops of oil as necessary. The neoprene wall is an oil resistant flexing medium. It can accommodate a high angle of torsional movement. As the amount of misalignment increases, the thickness of the neoprene is increased and its length is reduced. This permits the entire I.D. of the bearing to be utilized, with no shaft gall at the edges. The neoprene wall also acts as an isolating agent, silencing vibration, and eliminating the transmission of noise. The outer shell of both the bearing cartridge, and the pillow block is plated steel. The pillow block features a sturdy rustproof (zinc dichromate plated), stamped steel, and welded mounting bracket with slotted mounting holes.
“SILENT-LIGN” PILLOW BLOCK DIMENSIONS
Select the correct Bushings Inc. “Silent-Lign” Pillow Block part number from our shelf stock based on the available shaft sizes (see below for full dimensional information – plus additional special order sizes available).
SHELF STOCK ITEMS
For all of the Shelf Stock Item products listed below, direct links to McMaster-Carr’s website are below these tables.
|Part No.||I.D. Fractional
|1328-2||1 1/8″||1.126″-1.127″||1 3/4″|
|1328-4||1 1/4″||1.251″-1.252″||1 3/4″|
|Part No.||I.D. Fractional||I.D. Decimal||LENGTH|
|1327-5||1 1/16″||1.063″-1.064″||1 1/2″|
|1328-3||1 3/16″||1.189″-1.190″||1 3/4″|
|1328-5||1 5/16″||1.314″-1.315″||1 3/4″|
NEED ADDITIONAL ASSISTANCE?
Need a size not shown above? Call us at our factory for pricing and delivery, contact us at the factory by phone (248-650-0603) or fax (248-650-0606) or by e-mail at firstname.lastname@example.org